The Sag Rod is distinct from the Turnbuckle Rod or Clevis Rod. It usually requires a pass through of each component it supports, such as C purlins or Z purlins with diameters ranging from 12mm to 16mm. Sag Rods as Lateral Supports for Girts and Purlins. Z sections are widely used for girts and purlins. In many installations, sag rods are utilized to align these members for the connection of steel panels and limit the capacity to bend laterally and twist. This pass-through enables for take-up using regular nuts and washers. There is no requirement for left-hand thread at either end. This Custom Component adds a sag rod between two girts. It also creates holes in the two girts. There are two choices for adjusting the size of the nuts and washers. The first option sizes the nut and washer profiles according to the rod diameter.

U sections are frequently used in polyhouses and other specialised applications. This section is manufactured in the most advanced plant in Kurkumbh in thicknesses ranging from 1.00 mm to 3.00 mm, as specified by the customer. Cold roll forming is an energy-efficient and material-saving technology that is commonly used in the manufacture of C purlins and Z purlins and U sections.

52mm Steel Decking Sheet: Profile is the best in its category, with a maximum cover width in the industry, of 1030mm and a crest height of 52mm. The zinc-coated steel acts as an unbreakable formwork. It also provides a solid foundation for working on the slab's design. When using the trapezoidal shape, building overlap is quick and uncomplicated. SteelDECK 52 sheets can handle a wet concrete load in addition to construction and storage loads. It works as an all-time solution, allowing numerous layers to be cast simultaneously. SteelDECK 52 sheet is offered in various lengths to satisfy specific customer needs. Best decking for an industrial mezzanine floor. The SteelDECK 52 profile is simple to use and install because it comes in a variety of materials. The SteelDECK 52 profile is a steel decking system designed for concrete, masonry, or steel frame construction, with applications in infrastructural, industrial, and commercial sectors. Steel Decking Sheet profile is offered in total coated thicknesses (TCT) ranging from 0.8 to 1.2 millimetres.

Purlin C Purlins are available in a variety of sizes and material strengths (for example, 240 Mpa and 350 Mpa) to meet your building's design specifications. Purlins are perpendicular structural support members in the slope of the roof, with cladding installed on the principal rafter. These roof purlins are widely employed in large-scale infrastructure projects, factories, and warehouses. C purlins are manufactured from quality steel as follows 1. Galvanized C purlin and Z purlin in 240 Mpa and 80 Gsm 2. Galvanized C and Z purlin in 345 Mpa and 120 Gsm 3. C purlin and Z purlin are customized coating and yield strength of steel. 4. Roll formed to the desired length with factory-made punching according to your requirements.