Hat section purlin consists of two outward flanges and two vertical sides of the hat. Geometric Steel manufactures top hats for a variety of residential, commercial, and industrial purposes. Manufactured from high tensile galvanised steel (240Mpa and 350Mpa), Galvalume G550, AZ150, and CR in standard lengths up to 6.1 metres, with rib stiffener option.

Z purlins are ideal for providing lengthy spans between portal frames on an industrial building. Z Purlins are available in a variety of sizes and material strengths to meet the design requirements of your structure. Z purlins are composed of GI, CR, and HR steel and are roll formed to length with holes punched to your specifications. C & Z Purlins result in cost savings of up to 50% in structural steels when compared to standard sections such as Angle, Channel, and Hollow Section. It is available in conventional lengths, similar to round or square pipe, so no material is wasted.

These vertical louvers are placed to offer sight-proof screening, prohibiting visibility through them. These louvers are designed to be very water resistant, effectively blocking water entry. They are an essential component of air handling devices and are used in dusty environments such as swimming pools, restaurant lounge railings, and open kitchens. Typically installed as the first unit at the point of air intake, they capture bigger dust and sand particles, preventing them from flowing through. Sand Trap Lovers are also used for ventilation in parking lots, warehouses, generator rooms, fan rooms, swimming pools, restaurant lounge gates, open kitchens, and other arid or sandy environments. Geometric Steels designed sand trap louvers with a series of U channels on one side and a parallel set of inverted U channels with the Self Emptying System. It features a bottom face aperture in the casing for releasing separated sand particles. This configuration generates a resistance or barrier for sand particles in the intake air, causing them to settle. Sand poured through the drain opening and the Geometric steel's unique pattern. The Sand Trap Louver makes it self-cleaning. • The frame and blades are made of high-quality color-coated steel, extruded aluminium, stainless steel, and powder-coated aluminium profiles, which provide corrosion resistance and rigidity. • Two sets of inverted U-channels were installed vertically on opposite rows. • The Geometric steel's unusual design has an open bottom compartment for emptying filtered sand and dust. • G.I. color-coated, aluminium, powder-coated, or stainless steel are all available options. • Geometric steels are unique in their ability to segregate sand and dust from the air stream. • Typically used in ventilation applications and at the inlet duct of an air handling device. • Bird screen to defend against the intrusion of big objects. Standard Construction • Material: Galvanise colour coated /Aluminum powder coated/ Stainless Steel • Finish: Colour coated / powder coated /Mill • The minimum size is 300 mm H × 300 mm W, • maximum size is 3050 mm H x 4500 mm W in aluminium powder coating. • Maximum Dimensions: 5000 mm H x 5000 mm W in Galvanise colour coated Water penetration for louvers refers to their ability to resist water entry under wet weather. Louvers, which are commonly seen in ventilation or shade systems, combine airflow with rain protection. Lower penetration rates indicate effective water penetration resistance in geometric steel louvers, which prevents building water intrusion. Design parameters like as blade direction, spacing, and drainage have an impact on louver system water penetration performance. Optional (additional cost) • A variant of bird or insect mesh • Mounting Clips and flanged frame • Heavier thickness blade or frame construction

Apex vents are organised on-site. Constructed roof vents are roofing components that are custom-designed and installed directly on the roof's ridge to promote airflow in factories. The procedure of manufacturing frames at our plant and then installing them on-site vents on the ridge requires the material to meet the roof's ridge standards. The ridge vent is installed along the whole length of the roof ridge, allowing hot air to depart the factory's building space while fresh air enters through the inlet or opening vent. Apex-type airflow. Ridgevents are constructed on-site and have several advantages. Because they are designed to fit perfectly on the roof, they provide better sealing and are less likely to leak. Apex Ridgevent consists of two frame buildings. It is simple to deliver and setup. In our plant, the primary and secondary structures are welded. They are stable and firm. Based steel is welded to the main frame structure near the ridgevent throat. to allow it to be a portion of the roof. The sideboard uses an edge-flashing profile sheet that has been pressed and coloured. The ridge can be utilised with transparent polycarbonate sheets or metal sheets with colour coating. A flow guide plate with a leak-proof solution allows rainwater to flow onto the roof. The ventilation system Apex Ridgevent was created especially for roofs. consisting of both primary and secondary frameworks Convenience is the focus of both the installation and construction processes.

SteelDECK 76 is ideal for many common construction overview applications because it provides the widest selection of covers per weight. It can be used as a working platform or as a formwork to support wet concrete in the assembled state, and it operates steadily on slab concrete mixes. Standardized designs from Geometric Steel can be provided quickly. You can also have it customized to meet your specific needs.

52mm Steel Decking Sheet: Profile is the best in its category, with a maximum cover width in the industry, of 1030mm and a crest height of 52mm. The zinc-coated steel acts as an unbreakable formwork. It also provides a solid foundation for working on the slab's design. When using the trapezoidal shape, building overlap is quick and uncomplicated. SteelDECK 52 sheets can handle a wet concrete load in addition to construction and storage loads. It works as an all-time solution, allowing numerous layers to be cast simultaneously. SteelDECK 52 sheet is offered in various lengths to satisfy specific customer needs. Best decking for an industrial mezzanine floor. The SteelDECK 52 profile is simple to use and install because it comes in a variety of materials. The SteelDECK 52 profile is a steel decking system designed for concrete, masonry, or steel frame construction, with applications in infrastructural, industrial, and commercial sectors. Steel Decking Sheet profile is offered in total coated thicknesses (TCT) ranging from 0.8 to 1.2 millimetres.