ONION-TYPE AIRFLOW RIDGE VENT. The Onion-type Airflow Ridgevent is a cost-effective, low-maintenance way of eliminating heat, moisture, and airborne contaminants from industrial and commercial buildings. Ridge ventilators, do not have moving parts, and provide a long-term solution for increasing energy efficiency by leveraging natural thermodynamic forces. Airflow Ridgevent is perfect for extracting low to medium heat loads with minimal operating costs and maintenance. Best for future solar panel roofs. FEATURES AND BENEFITS • Natural ventilation - No operating expenses • Efficient airflow - cool building • Assemble unit for easy installation. • Knockdown form: cost-effective, damage-resistant. • Extensive size range—suits most designs. • There are no moving parts, thus it requires no maintenance. • Compound design - prevents rainwater entry. • Self-draining requires no additional plumbin • Mesh guarding creates a barrier for birds and vermin. • Suitable for solar panel installation buildings. • Warranty: 36 months

MONITOR TYPE AIRFLOW RIDGE VENT A Monitor-type Airflow Ridgevent with two louvers that assemble vertically as exhaust plates perpendicular to the roof and a cavity Ridge that is colour coated galvanise. The Monitor type airflow ridgevent is a pre-assembled device that may be placed straight on site. FEATURES AND BENEFITS • High natural airflow. • The internal pressure of structures reduced. • The profiles are available as colour coated steel, as well as all roofing profiles. • Improves and maintains a comfortable living environment. • There's no power, moving parts, or noise • Maintenance-free (no clogging). • Maintains a clean and appealing roofline. • Increases the life of the building through natural air movement. • They are situated exactly where they are most effective, at the highest point on the rooftop. Projected at the pinnacle of the roof to maximise air circulation. • ALSO: Simple to put on existing old roofs. • Maximum space utilisation with an existing structural configuration. • Made in India.

Apex vents are organised on-site. Constructed roof vents are roofing components that are custom-designed and installed directly on the roof's ridge to promote airflow in factories. The procedure of manufacturing frames at our plant and then installing them on-site vents on the ridge requires the material to meet the roof's ridge standards. The ridge vent is installed along the whole length of the roof ridge, allowing hot air to depart the factory's building space while fresh air enters through the inlet or opening vent. Apex-type airflow. Ridgevents are constructed on-site and have several advantages. Because they are designed to fit perfectly on the roof, they provide better sealing and are less likely to leak. Apex Ridgevent consists of two frame buildings. It is simple to deliver and setup. In our plant, the primary and secondary structures are welded. They are stable and firm. Based steel is welded to the main frame structure near the ridgevent throat. to allow it to be a portion of the roof. The sideboard uses an edge-flashing profile sheet that has been pressed and coloured. The ridge can be utilised with transparent polycarbonate sheets or metal sheets with colour coating. A flow guide plate with a leak-proof solution allows rainwater to flow onto the roof. The ventilation system Apex Ridgevent was created especially for roofs. consisting of both primary and secondary frameworks Convenience is the focus of both the installation and construction processes.

Thermal insulated metal roofing sheets are made up of three separate materials that offer product specific properties, which are then combined to form a new type of heat insulation sheets for a profile. A: The top layer. Steel's strength and durability are derived from its profile sheet of metal. Available in PPGI/GL/PPGL/AL, with an 1135mm profile width and a 1060mm cover width. B: Intermediate Layer. Its particular insulation material is available in 6mm, 12mm, 19mm, and 24mm thicknesses depending on the application. C: (bottom-lying layer) Its aluminium foil radiant barriers Thermal insulated single-skin metal roofing sheets : Thermal insulated roofing sheets are made up of three different types of materials, each with its own set of qualities, and they are combined to form a completely new generation of sound and thermal insulated roofing metal sheets. Thermal Insulated metal roofing sheets are designed to preserve a comfortable and sanitary indoor atmosphere in low-ambient temperatures. Make your office feel more alive, vital, and healthy. thermal insulated metal roofing sheets Radiant Barriers are simple to install and operate, having a high water vapour permeability that aids in reducing water absorption. Thermal insulated roofing sheets are among the most versatile and energy-efficient wall and roofing materials on the market, with proven applications in industrial/residential warehouses, commercial and school/college halls, public buildings, and agricultural storage facilities. Dimensions: length and width. The largest sheet measures 0.50mm actual 1135mm with a cover width of 1060mm. spread profile (composed of four profiles and three valleys) The panels can be lapped, and the finished cover width is 1060mm with reduced lap loss and increased cover width. We construct panels to the customer's exact requirements from 600mm to 6000mm in length. Single-skin insulation Thickness: The insulation/core is available in 6mm, 12mm, 19mm, and 24mm thicknesses, with a bottom layer of aluminium foil. Dimensions: length and width. The largest sheet measures 0.50mm actual 1135mm with a cover width of 1060mm. spread profile (composed of four profiles and three valleys) The panels can be lapped, and the finished cover width is 1060mm with reduced lap loss and increased cover width. We construct panels to the customer's exact requirements from 600mm to 6000mm in length. Single-skin insulation Thickness: The insulation/core is available in 6mm, 12mm, 19mm, and 24mm thicknesses, with a bottom layer of aluminium foil.

These vertical louvers are placed to offer sight-proof screening, prohibiting visibility through them. These louvers are designed to be very water resistant, effectively blocking water entry. They are an essential component of air handling devices and are used in dusty environments such as swimming pools, restaurant lounge railings, and open kitchens. Typically installed as the first unit at the point of air intake, they capture bigger dust and sand particles, preventing them from flowing through. Sand Trap Lovers are also used for ventilation in parking lots, warehouses, generator rooms, fan rooms, swimming pools, restaurant lounge gates, open kitchens, and other arid or sandy environments. Geometric Steels designed sand trap louvers with a series of U channels on one side and a parallel set of inverted U channels with the Self Emptying System. It features a bottom face aperture in the casing for releasing separated sand particles. This configuration generates a resistance or barrier for sand particles in the intake air, causing them to settle. Sand poured through the drain opening and the Geometric steel's unique pattern. The Sand Trap Louver makes it self-cleaning. • The frame and blades are made of high-quality color-coated steel, extruded aluminium, stainless steel, and powder-coated aluminium profiles, which provide corrosion resistance and rigidity. • Two sets of inverted U-channels were installed vertically on opposite rows. • The Geometric steel's unusual design has an open bottom compartment for emptying filtered sand and dust. • G.I. color-coated, aluminium, powder-coated, or stainless steel are all available options. • Geometric steels are unique in their ability to segregate sand and dust from the air stream. • Typically used in ventilation applications and at the inlet duct of an air handling device. • Bird screen to defend against the intrusion of big objects. Standard Construction • Material: Galvanise colour coated /Aluminum powder coated/ Stainless Steel • Finish: Colour coated / powder coated /Mill • The minimum size is 300 mm H × 300 mm W, • maximum size is 3050 mm H x 4500 mm W in aluminium powder coating. • Maximum Dimensions: 5000 mm H x 5000 mm W in Galvanise colour coated Water penetration for louvers refers to their ability to resist water entry under wet weather. Louvers, which are commonly seen in ventilation or shade systems, combine airflow with rain protection. Lower penetration rates indicate effective water penetration resistance in geometric steel louvers, which prevents building water intrusion. Design parameters like as blade direction, spacing, and drainage have an impact on louver system water penetration performance. Optional (additional cost) • A variant of bird or insect mesh • Mounting Clips and flanged frame • Heavier thickness blade or frame construction

Industrial Louvers improve airflow while blocking undesirable elements such as water and trash. Adequate ventilation is required for fresh air intake and hot air exhaust in industrial structures. It also improves aesthetics by constructing sight-proof screens for privacy and equipment concealment. Selecting the proper product is critical to performance. Geometric Steel provides design solutions for a variety of industrial applications.

When acquiring a property, today's educated clients silently scrutinise the detailing done by the developer and designer throughout construction. Geometric Steels' duct closure louvers are the greatest alternative for improving a building's aesthetics while keeping pigeons out of the sanitary duct area. Duct cover louvers improve building aesthetics by providing efficient ventilation, preventing pigeon penetration, and protecting against the health problems associated with bird droppings. Geometric steel louvers are a sustainable option. It is critical to select louvers that are specifically built to prevent bird ingress. Consult with our specialist staff, who can assist you in selecting and installing the best louver system for your specific requirements.

HAT TOP RIDGE VENT FOR EFFECTIVE VENTILATION. The Hat top Airflow Ridgevent is equipped with two louvers exhaust plates in parallel with the roof slope, as well as a characteristic hat-style cavity Ridge constructed of colour coated galvanise, colour coated galvalume, or galvalume according to customer specifications. Hat Top Airflow Ridgevent is easy to install on any roof profile design, including old profiles. It requires no maintenance because of its long performance life cycle. FEATURES AND BENEFITS • Continuous High natural airflow. • Five metres of airflow. Ridgevent is similar to two whirlybirds. • The internal pressure of structures reduced. • It is available in color-coated steel and may be fitted on any roofing profile. • Available in color-coated steel and all roofing profiles. • Improves and maintains a comfortable living environment. • There's no power, moving parts, or noise • Maintenance-free (no clogging). • Maintains a clean, appealing roofline; hidden beneath louvers and ridge cap. • Increases the life of the building through natural air movement. • Actively prevents the buildup of mould within the ceiling cavity - several health benefits. • Located precisely where they do the most benefit, at the pinnacle of the roof, Airflow Ridgevent are nearly undetectable from ground level and deliver better airflow than other vents. • ADDITIONALLY: Simple to put on existing old roofs. • Maximum space utilisation with an existing structural configuration. • Made in India.

U sections are frequently used in polyhouses and other specialised applications. This section is manufactured in the most advanced plant in Kurkumbh in thicknesses ranging from 1.00 mm to 3.00 mm, as specified by the customer. Cold roll forming is an energy-efficient and material-saving technology that is commonly used in the manufacture of C purlins and Z purlins and U sections.