ONION-TYPE AIRFLOW RIDGE VENT. The Onion-type Airflow Ridgevent is a cost-effective, low-maintenance way of eliminating heat, moisture, and airborne contaminants from industrial and commercial buildings. Ridge ventilators, do not have moving parts, and provide a long-term solution for increasing energy efficiency by leveraging natural thermodynamic forces. Airflow Ridgevent is perfect for extracting low to medium heat loads with minimal operating costs and maintenance. Best for future solar panel roofs. FEATURES AND BENEFITS • Natural ventilation - No operating expenses • Efficient airflow - cool building • Assemble unit for easy installation. • Knockdown form: cost-effective, damage-resistant. • Extensive size range—suits most designs. • There are no moving parts, thus it requires no maintenance. • Compound design - prevents rainwater entry. • Self-draining requires no additional plumbin • Mesh guarding creates a barrier for birds and vermin. • Suitable for solar panel installation buildings. • Warranty: 36 months

These vertical louvers are placed to offer sight-proof screening, prohibiting visibility through them. These louvers are designed to be very water resistant, effectively blocking water entry. They are an essential component of air handling devices and are used in dusty environments such as swimming pools, restaurant lounge railings, and open kitchens. Typically installed as the first unit at the point of air intake, they capture bigger dust and sand particles, preventing them from flowing through. Sand Trap Lovers are also used for ventilation in parking lots, warehouses, generator rooms, fan rooms, swimming pools, restaurant lounge gates, open kitchens, and other arid or sandy environments. Geometric Steels designed sand trap louvers with a series of U channels on one side and a parallel set of inverted U channels with the Self Emptying System. It features a bottom face aperture in the casing for releasing separated sand particles. This configuration generates a resistance or barrier for sand particles in the intake air, causing them to settle. Sand poured through the drain opening and the Geometric steel's unique pattern. The Sand Trap Louver makes it self-cleaning. • The frame and blades are made of high-quality color-coated steel, extruded aluminium, stainless steel, and powder-coated aluminium profiles, which provide corrosion resistance and rigidity. • Two sets of inverted U-channels were installed vertically on opposite rows. • The Geometric steel's unusual design has an open bottom compartment for emptying filtered sand and dust. • G.I. color-coated, aluminium, powder-coated, or stainless steel are all available options. • Geometric steels are unique in their ability to segregate sand and dust from the air stream. • Typically used in ventilation applications and at the inlet duct of an air handling device. • Bird screen to defend against the intrusion of big objects. Standard Construction • Material: Galvanise colour coated /Aluminum powder coated/ Stainless Steel • Finish: Colour coated / powder coated /Mill • The minimum size is 300 mm H × 300 mm W, • maximum size is 3050 mm H x 4500 mm W in aluminium powder coating. • Maximum Dimensions: 5000 mm H x 5000 mm W in Galvanise colour coated Water penetration for louvers refers to their ability to resist water entry under wet weather. Louvers, which are commonly seen in ventilation or shade systems, combine airflow with rain protection. Lower penetration rates indicate effective water penetration resistance in geometric steel louvers, which prevents building water intrusion. Design parameters like as blade direction, spacing, and drainage have an impact on louver system water penetration performance. Optional (additional cost) • A variant of bird or insect mesh • Mounting Clips and flanged frame • Heavier thickness blade or frame construction

The Sag Rod is distinct from the Turnbuckle Rod or Clevis Rod. It usually requires a pass through of each component it supports, such as C purlins or Z purlins with diameters ranging from 12mm to 16mm. Sag Rods as Lateral Supports for Girts and Purlins. Z sections are widely used for girts and purlins. In many installations, sag rods are utilized to align these members for the connection of steel panels and limit the capacity to bend laterally and twist. This pass-through enables for take-up using regular nuts and washers. There is no requirement for left-hand thread at either end. This Custom Component adds a sag rod between two girts. It also creates holes in the two girts. There are two choices for adjusting the size of the nuts and washers. The first option sizes the nut and washer profiles according to the rod diameter.

Z purlins are ideal for providing lengthy spans between portal frames on an industrial building. Z Purlins are available in a variety of sizes and material strengths to meet the design requirements of your structure. Z purlins are composed of GI, CR, and HR steel and are roll formed to length with holes punched to your specifications. C & Z Purlins result in cost savings of up to 50% in structural steels when compared to standard sections such as Angle, Channel, and Hollow Section. It is available in conventional lengths, similar to round or square pipe, so no material is wasted.

Purlin C Purlins are available in a variety of sizes and material strengths (for example, 240 Mpa and 350 Mpa) to meet your building's design specifications. Purlins are perpendicular structural support members in the slope of the roof, with cladding installed on the principal rafter. These roof purlins are widely employed in large-scale infrastructure projects, factories, and warehouses. C purlins are manufactured from quality steel as follows 1. Galvanized C purlin and Z purlin in 240 Mpa and 80 Gsm 2. Galvanized C and Z purlin in 345 Mpa and 120 Gsm 3. C purlin and Z purlin are customized coating and yield strength of steel. 4. Roll formed to the desired length with factory-made punching according to your requirements.