Z purlins are ideal for providing lengthy spans between portal frames on an industrial building. Z Purlins are available in a variety of sizes and material strengths to meet the design requirements of your structure. Z purlins are composed of GI, CR, and HR steel and are roll formed to length with holes punched to your specifications. C & Z Purlins result in cost savings of up to 50% in structural steels when compared to standard sections such as Angle, Channel, and Hollow Section. It is available in conventional lengths, similar to round or square pipe, so no material is wasted.

Purlin C Purlins are available in a variety of sizes and material strengths (for example, 240 Mpa and 350 Mpa) to meet your building's design specifications. Purlins are perpendicular structural support members in the slope of the roof, with cladding installed on the principal rafter. These roof purlins are widely employed in large-scale infrastructure projects, factories, and warehouses. C purlins are manufactured from quality steel as follows 1. Galvanized C purlin and Z purlin in 240 Mpa and 80 Gsm 2. Galvanized C and Z purlin in 345 Mpa and 120 Gsm 3. C purlin and Z purlin are customized coating and yield strength of steel. 4. Roll formed to the desired length with factory-made punching according to your requirements.

Hat section purlin consists of two outward flanges and two vertical sides of the hat. Geometric Steel manufactures top hats for a variety of residential, commercial, and industrial purposes. Manufactured from high tensile galvanised steel (240Mpa and 350Mpa), Galvalume G550, AZ150, and CR in standard lengths up to 6.1 metres, with rib stiffener option.

U sections are frequently used in polyhouses and other specialised applications. This section is manufactured in the most advanced plant in Kurkumbh in thicknesses ranging from 1.00 mm to 3.00 mm, as specified by the customer. Cold roll forming is an energy-efficient and material-saving technology that is commonly used in the manufacture of C purlins and Z purlins and U sections.

SteelDECK 76 is ideal for many common construction overview applications because it provides the widest selection of covers per weight. It can be used as a working platform or as a formwork to support wet concrete in the assembled state, and it operates steadily on slab concrete mixes. Standardized designs from Geometric Steel can be provided quickly. You can also have it customized to meet your specific needs.

Apex vents are organised on-site. Constructed roof vents are roofing components that are custom-designed and installed directly on the roof's ridge to promote airflow in factories. The procedure of manufacturing frames at our plant and then installing them on-site vents on the ridge requires the material to meet the roof's ridge standards. The ridge vent is installed along the whole length of the roof ridge, allowing hot air to depart the factory's building space while fresh air enters through the inlet or opening vent. Apex-type airflow. Ridgevents are constructed on-site and have several advantages. Because they are designed to fit perfectly on the roof, they provide better sealing and are less likely to leak. Apex Ridgevent consists of two frame buildings. It is simple to deliver and setup. In our plant, the primary and secondary structures are welded. They are stable and firm. Based steel is welded to the main frame structure near the ridgevent throat. to allow it to be a portion of the roof. The sideboard uses an edge-flashing profile sheet that has been pressed and coloured. The ridge can be utilised with transparent polycarbonate sheets or metal sheets with colour coating. A flow guide plate with a leak-proof solution allows rainwater to flow onto the roof. The ventilation system Apex Ridgevent was created especially for roofs. consisting of both primary and secondary frameworks Convenience is the focus of both the installation and construction processes.

Thermal insulated metal roofing sheets are made up of three separate materials that offer product specific properties, which are then combined to form a new type of heat insulation sheets for a profile. A: The top layer. Steel's strength and durability are derived from its profile sheet of metal. Available in PPGI/GL/PPGL/AL, with an 1135mm profile width and a 1060mm cover width. B: Intermediate Layer. Its particular insulation material is available in 6mm, 12mm, 19mm, and 24mm thicknesses depending on the application. C: (bottom-lying layer) Its aluminium foil radiant barriers Thermal insulated single-skin metal roofing sheets : Thermal insulated roofing sheets are made up of three different types of materials, each with its own set of qualities, and they are combined to form a completely new generation of sound and thermal insulated roofing metal sheets. Thermal Insulated metal roofing sheets are designed to preserve a comfortable and sanitary indoor atmosphere in low-ambient temperatures. Make your office feel more alive, vital, and healthy. thermal insulated metal roofing sheets Radiant Barriers are simple to install and operate, having a high water vapour permeability that aids in reducing water absorption. Thermal insulated roofing sheets are among the most versatile and energy-efficient wall and roofing materials on the market, with proven applications in industrial/residential warehouses, commercial and school/college halls, public buildings, and agricultural storage facilities. Dimensions: length and width. The largest sheet measures 0.50mm actual 1135mm with a cover width of 1060mm. spread profile (composed of four profiles and three valleys) The panels can be lapped, and the finished cover width is 1060mm with reduced lap loss and increased cover width. We construct panels to the customer's exact requirements from 600mm to 6000mm in length. Single-skin insulation Thickness: The insulation/core is available in 6mm, 12mm, 19mm, and 24mm thicknesses, with a bottom layer of aluminium foil. Dimensions: length and width. The largest sheet measures 0.50mm actual 1135mm with a cover width of 1060mm. spread profile (composed of four profiles and three valleys) The panels can be lapped, and the finished cover width is 1060mm with reduced lap loss and increased cover width. We construct panels to the customer's exact requirements from 600mm to 6000mm in length. Single-skin insulation Thickness: The insulation/core is available in 6mm, 12mm, 19mm, and 24mm thicknesses, with a bottom layer of aluminium foil.

Access hatches on the roof Any industrial building with a metal roof must have access hatches in order to offer safe and easily accessible access for electrical repairs and roof maintenance. Roof access hatches are built and installed to guarantee security for anyone entering industrial and commercial roofs via stairways or ladders. Because to the hatch's low-profile design, the building's architects were able to keep its straight lines. Additionally, the cost of installing these parts could be far less than that of building the traditional peripheral of a staircase. Usually, an elevated or fixed ladder that is placed outside the building is used to get access to roofs. In order to reduce the psychological harm that psychopaths might cause, it is always dangerous to have access to roof ladders outside of the building's perimeter and to place restrictions on who can reach the roof. In severe weather, using a ladder outside to access the roof could be dangerous. It's not something to think about. It is ideal to have completely safe and secure access to the building's roof from within. The main purpose of geometric steel roof access hatches is to provide industrial buildings with a reliable and secure means of roof access. Roof ladders enable owners and maintenance personnel to get access to the roof for fixes or to perform maintenance.

These vertical louvers are placed to offer sight-proof screening, prohibiting visibility through them. These louvers are designed to be very water resistant, effectively blocking water entry. They are an essential component of air handling devices and are used in dusty environments such as swimming pools, restaurant lounge railings, and open kitchens. Typically installed as the first unit at the point of air intake, they capture bigger dust and sand particles, preventing them from flowing through. Sand Trap Lovers are also used for ventilation in parking lots, warehouses, generator rooms, fan rooms, swimming pools, restaurant lounge gates, open kitchens, and other arid or sandy environments. Geometric Steels designed sand trap louvers with a series of U channels on one side and a parallel set of inverted U channels with the Self Emptying System. It features a bottom face aperture in the casing for releasing separated sand particles. This configuration generates a resistance or barrier for sand particles in the intake air, causing them to settle. Sand poured through the drain opening and the Geometric steel's unique pattern. The Sand Trap Louver makes it self-cleaning. • The frame and blades are made of high-quality color-coated steel, extruded aluminium, stainless steel, and powder-coated aluminium profiles, which provide corrosion resistance and rigidity. • Two sets of inverted U-channels were installed vertically on opposite rows. • The Geometric steel's unusual design has an open bottom compartment for emptying filtered sand and dust. • G.I. color-coated, aluminium, powder-coated, or stainless steel are all available options. • Geometric steels are unique in their ability to segregate sand and dust from the air stream. • Typically used in ventilation applications and at the inlet duct of an air handling device. • Bird screen to defend against the intrusion of big objects. Standard Construction • Material: Galvanise colour coated /Aluminum powder coated/ Stainless Steel • Finish: Colour coated / powder coated /Mill • The minimum size is 300 mm H × 300 mm W, • maximum size is 3050 mm H x 4500 mm W in aluminium powder coating. • Maximum Dimensions: 5000 mm H x 5000 mm W in Galvanise colour coated Water penetration for louvers refers to their ability to resist water entry under wet weather. Louvers, which are commonly seen in ventilation or shade systems, combine airflow with rain protection. Lower penetration rates indicate effective water penetration resistance in geometric steel louvers, which prevents building water intrusion. Design parameters like as blade direction, spacing, and drainage have an impact on louver system water penetration performance. Optional (additional cost) • A variant of bird or insect mesh • Mounting Clips and flanged frame • Heavier thickness blade or frame construction